Catalyst2960のFirmware Update
tftpサーバーをPCに立てて取りにいく感じ
1.PCでtftpサーバーを起動
2.Catalystで以下を実行
cat2960#dir flash: Directory of flash:/ 545 drwx 192 Mar 1 1993 02:08:00 +00:00 c2960-lanbase-mz.122-35.SE1 32514048 bytes total (24193536 bytes free) cat2960# cat2960#archive download-sw /leave-old-sw tftp://192.168.10.25/c2960-lanbasek9-tar.150-2.SE6.tar
3.無事Updateが完了したら、bootイメージが変更されていることを確認し、 reload で再起動を実施する
cat2960#
cat2960#show flash:
Directory of flash:/
3 drwx 256 Mar 1 1993 02:17:51 +00:00 c2960-lanbasek9-mz.150-2.SE6
545 drwx 192 Mar 1 1993 02:08:00 +00:00 c2960-lanbase-mz.122-35.SE1
32514048 bytes total (8210944 bytes free)
cat2960#
cat2960#show boot
BOOT path-list : flash:c2960-lanbasek9-mz.150-2.SE6/c2960-lanbasek9-mz.150-2.SE6.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
NVRAM/Config file
buffer size: 65536
cat2960#
5.bootイメージが変更されていなかったら以下のコマンドで変更
cat2960#configure terminal cat2960(config)#boot system flash:c2960-lanbasek9-mz.150-2.SE6/c2960-lanbasek9-mz.150-2.SE6.bin
6.問題無く新Firmwareで起動できたら、確認
cat2960>enable
cat2960#
cat2960#show boot
BOOT path-list : flash:c2960-lanbasek9-mz.150-2.SE6/c2960-lanbasek9-mz.150-2.SE6.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
Allow Dev Key : yes
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
NVRAM/Config file
buffer size: 65536
Timeout for Config
Download: 0 seconds
Config Download
via DHCP: disabled (next boot: disabled)
cat2960#
cat2960#show version
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 15.0(2)SE6, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 09-Apr-14 03:40 by prod_rel_team
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)SEE6, RELEASE SOFTWARE (fc1)
cat2960 uptime is 6 minutes
System returned to ROM by power-on
System image file is "flash:c2960-lanbasek9-mz.150-2.SE6/c2960-lanbasek9-mz.150-2.SE6.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C2960-48TC-L (PowerPC405) processor (revision F0) with 65536K bytes of memory.
Processor board ID ***********
Last reset from power-on
1 Virtual Ethernet interface
48 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : **:**:**:**:**:**
Motherboard assembly number : 73-9835-09
Power supply part number : 341-0097-02
Motherboard serial number : ***********
Power supply serial number : ***********
Model revision number : F0
Motherboard revision number : A0
Model number : WS-C2960-48TC-L
System serial number : ***********
Top Assembly Part Number : 800-26672-04
Top Assembly Revision Number : A0
Version ID : V04
CLEI Code Number : **********
Hardware Board Revision Number : 0x02
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 50 WS-C2960-48TC-L 15.0(2)SE6 C2960-LANBASEK9-M
Configuration register is 0xF
cat2960#
7.新しい Firmwareで問題なく起動するようならば、古い Firmwareの削除
cat2960#dir flash:
Directory of flash:/
3 drwx 256 Mar 1 1993 02:17:51 +00:00 c2960-lanbasek9-mz.150-2.SE6
545 drwx 192 Mar 1 1993 02:08:00 +00:00 c2960-lanbase-mz.122-35.SE1
1206 -rwx 2006 Mar 1 1993 00:04:37 +00:00 config.text
1207 -rwx 5 Mar 1 1993 00:04:37 +00:00 private-config.text
1208 -rwx 2072 Mar 1 1993 00:04:37 +00:00 multiple-fs
32514048 bytes total (8205824 bytes free)
cat2960#
cat2960#
cat2960#delete /force /recursive flash:c2960-lanbase-mz.122-35.SE1
cat2960#
cat2960#dir flash:
Directory of flash:/
3 drwx 256 Mar 1 1993 02:17:51 +00:00 c2960-lanbasek9-mz.150-2.SE6
1206 -rwx 2006 Mar 1 1993 00:04:37 +00:00 config.text
1207 -rwx 5 Mar 1 1993 00:04:37 +00:00 private-config.text
1208 -rwx 2072 Mar 1 1993 00:04:37 +00:00 multiple-fs
32514048 bytes total (16525312 bytes free)
cat2960#
Ciscoのマニュアル見ると Firmware Updateは
archive download-sw /overwrite tftp://192.168.10.25/c2960-lanbasek9-tar.150-2.SE6.tar
overwriteが推奨らしい
